Home

OH&S

Roof Ready

Guarantees

Job Vacancies

Contact Us

Boral - Shingle

Click to enlarge

Boral Roofing has transformed one of nature's most basic elements into a product which is rich and warm in appearance.

The elegant flat line of these quality Terracotta ShingleT roof tiles makes them the perfect complement to a wide range of architectural styles, building materials and home environments - from classic to contemporary; from country estate to coastal retreat.

Featuring a low 15° pitch, this flat profile was designed to provide greater design flexibility that contemporary rooflines demand.

For more information, please visit this products webpage.

Sydney Red

Antique Bronze	Eclipse	Evergreen	Feldspar	Ghost Gum Grey
Mineral	Savanna	Wild Choc

Coverage	No. of tiles per m (squared): 14.3
Dimensions (Nominal)	Actual length: Actual width: Exposed length: Exposed width:	425 mm 264 mm 310 mm 226 mm
Mass (Nominal)	Mass per tile:	3.1 kg
	Mass per m (squared):	44.33 kg
Set Out (Nominal)	Batten spacing:	305 mm - 312 mm max.
First Course	Batten spacing:	342 mm
Head Lap	Minimum head lap shall be 75 mm. This may increase according to set out. However, head lap should not exceed 120 mm.
Recommended Bond	Cross Bond
Sarking	To conform to AS 2050 Installation of roof tiles, Table 2.7, Sarking requirements in relation to pitch/rafter length.

Minimum Roof Pitch	Minimum roof pitch 15°, will require Sarking in accordance with Table 2.7, AS 2050 Installation of roof tiles. Minimum un-sarked roof pitch 20°. Under normal conditions sarking is not required however; some areas may require special consideration, such as coastal areas and exposed or elevated sites.
Maximum rafter length	At the minimum roof pitch (for sarked and un-sarked roofs) the maximum rafter length is 4.5 metres. For rafter lengths over 4.5 metres, add 2° to the pitch for every metre of additional rafter length.
Quality	All tiles are designed to conform to the Australian Standards AS 2049 roof tiles, and AS 2050 Installation of roof tiles.
Colours and Finishes	Please refer to the "Colours and Finishes" leaflet to determine the colours and finishes available in your state.
General	Product information contained in this leaflet is correct at time of printing. However, due to Boral's commitment for continued improvement, specifications are subject to change without notice. Boral Roofing's liability is limited to the replacement of product should it fail to perform as specified in literature current at the date of manufacture. Fixing standards and product specifications contained in this leaflet are minimum recommendations based on Australian Standards and good trade practice. However, we recommend that local authorities are consulted as they may require different standards to be met.